You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I have a Connex 3300hp. When the radio is turned on I have no TX/Rx. If I wait about 1 minute all of a sudden the radio starts receiving and transmitting. Anyone have any thoughts?
I would say you have a cold solder joint some where. take a plastic tool and push on the board and see if you can find where it is at. or you can use some cold spray and see where it cuts out at when you hit a small spot at a time. I would start in the VCO and PLL areas 1st to see if it is around that area.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.