You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

Yes I know about that one. I am talking about the calibration settings menu.

From some experimenting I have done, here is what I have found so far...

Press and Hold these keys while powering the radio ON:

MENU + EMG = BAND selection (BAND 1 = 10m // BAND 2 - 12m-10m)

MENU + MODE = LCD segment test

CH knob + MENU = KEY TEST. This allows for testing all keys and knobs for correct operation

CH knob + EMG = BOOT (probably used for loading new firmware).

Lets see what else we can find!

73

[QUOTE="Pez, post: 798001, member: 60836"] Yes I know about that one. I am talking about the calibration settings menu. From some experimenting I have done, here is what I have found so far... [U]Press and Hold these keys while powering the radio ON:[/U] [B]MENU + EMG [/B]= BAND selection (BAND 1 = 10m // BAND 2 - 12m-10m) [B]MENU + MODE [/B]= LCD segment test [B]CH knob + MENU[/B] = KEY TEST. This allows for testing all keys and knobs for correct operation [B]CH knob + EMG [/B]= BOOT (probably used for loading new firmware). Lets see what else we can find! 73 [/QUOTE]

Top Bottom