Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Current Rules Holding Hams Back from Adopting State-of-the-Art Technology, ARRL Says

A

ARRL

Well-Known Member
Nov 15, 2008
10,935
54
58
In comments (also attached below) filed on October 12 with the FCC, ARRL reiterated its case that the FCC should impose a 2.8 kHz limit on symbol rate for digital modes, arguing that its approach is both balanced and necessary. ARRL had asked the FCC to change the Part 97 rules to delete the symbol rate limits in §97.307(f) and replace them with a maximum bandwidth for data emissions of 2.8 kHz...

Continue reading...
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom