• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

D104 MIC

UWASP1

New Member
Sep 16, 2013
2
0
1
I HAVE A D104 MIC... IT HAS A RED WIRE AND A WHITE WIRE WRAPPED WITH BARE WIRE... CAN IT BE HOOKED UP TO A 4 PIN CONNECTOR FOR A COBRA RADIO?
 

D-104

Short answer - YES

White wire is the Audio wire

PTT is between the red and shield

Hope this helps

Your mic is not amplified, do not expect G R E A T audio with it.....
 
  • Like
Reactions: 1 person
IM ABOUT AS DUMB AS A BOX OF ROCKS SO IM NOT SURE WHAT PTT IS... AND WHAT IS THE 9 VOLT BATTERY FOR? NOW I JUST NEED TO KNOW WHICH WIRE GOES WHERE ON A 4 PIN PLUG FOR A COBRA 29LTD
 
'PTT' = 'push to talk'

Might want to be sure there aren't four conductors in that cable, as I am not aware of any D-104 that didn't have at least that many. There should be one shield, red, white, and black wire. Most of the new ones are all 6 conductors ; the old ones are all 4 conductors. The 9 volt battery is for the built-in mic preamp. Test and replace if necessary.

Astatic D-104 (4 wire) to Cobra 29LTD
pin 1- Shield
pin 2- White
pin 3- Red
pin 4- Black

4mini.jpg
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.