Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

D104

S

solderjerk

Member
May 4, 2007
23
0
11
Shingletown Ca.
I have a D104 hooked to my Pearce Simpson Cheetah. Does anyone know how to get rid of the pop in the speaker when you unkey and/or key. I tried a diode across the TX/RX relay but it didn't work. Thanks
 

is that radio relay controlled?you hear a click inside the radio when you key?if so make sure the d104 your using is a tug8 stand with the switch inside set to relay operation.could be that.
 
Yeah its a TUG8, already tried that. I just also noticed that when I turn the band switch it also pops in the speaker so I guess it's not the mic, but the radio. (Back to the drawing board). Thanks.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom