Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

DAK IX Stock Mic Wiring

B

Bob820

Member
Apr 26, 2013
2
0
11
I have a DAK IX & a DAK stock mic I got from a DAK III mobile. The Mobile is a 5 pin din (like Radio Shack has) and I can't figure out how to wire the DAK stock mic to it. I looked on CB Tricks, and it didn't tell me what I need to know.
The stock mic has 5 wires:
-White
-Purple
-Red
-Black > (Maybe Shield)
-Yellow
I should have wrote down the wiring code b4 I unsoldered it from the 5 pin plug.
My DAK IX is a regular 4 pin, but it's not wired on the inside like a Cobra 4 pin.
Any help would be greatly appreciated!!!
Thanks!
73's
Bob
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom