• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Deleting/Clearing/Masking Memories VX-8R

ke7vvt

Active Member
May 15, 2009
149
1
26
I couldn't figure this out until I saw this,

Yea Scott, in case you don't already know, with the RT Systems everytime you reload it erases all the memories, if you want to delete a memory just remove it from the file and it won't load the next time. Also if you want to remove it from the radio, hold the fw key for 1/2 a second, long enough for the icon to show up in the display, then press the internet key and the freq is deleted.

Pg 54 in the manual. Masking... duh.

Or you could reset the radio, Pg 134, but that gets rid of everything. Unless you are programming in memories, menu item 54 Memory Protect will save you the head ache of goofing up the 999+ memory spaces.

Thanks West!
 

Skips over, but you can program over the top of the masked freq too. It is pretty easy to fat finger (thumb) that func key and add in a few extra memories where you don't want them. This is the alternative to reseting the radio's microprocessor if you can't handle those mistake memories.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.