Toll Free, I'm glad you brought up alternative engines and diesel. I have a great idea for a two stroke diesel, I just don't have a donor car to put the idea into practice. It would use a Mercedes or VW diesel and would not be inefficient because diesels squirt the fuel in after they compress the air (after the valves have closed). I don't know about a rotary diesel, though. I don't think they have the compression to do it properly. They don't have valves that close so that a lot of pressure can build, but mabey some very massive turbos could do the job so long as there is not too much overlap between the exhaust and intake ports.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Diesels (continued from antennas)
- Thread starter thetnhillbilly
- Start date
Sorry, but I'm an engine geek, not a computer nerd. I don't speak you people's language. Why would I want to write that in a private message anyway? I was commenting on something we were talking about in another thread, I was just trying to move the diesel talk out of the antennas section. I'll just LU my IC and get out of your way, JOs.
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.