• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

DX Radio

  • Thread starter Thread starter Flyers8527
  • Start date Start date
F

Flyers8527

Guest
Hey everyone, I have a TRC-511 radio, and am looking to either upgrade to SSB radio that is capable of DXing. Any suggestions on what i should get for DXing or is there any way to modify my old radio to DX?




</p>
 

Many many folks DX on AM only.I prefer SSB myself but that's just me. As far as upgrading to another radio, The sky,your pocket book & desires are the limits<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/wink.gif ALT=";)"> The Titan Roadpro is a pretty decent radio with AM,FM,SSB,freq. counter and all the extra channels for around $100. The Mil-spec. Icom goes for around $5500 and there is LOTS of radios between the two<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)">


newsexy.gif
hook948.gif
newsexy.gif

smalllincoln.gif
Hot Rod Lincoln -Dancing around the World ! ...... CDX948 Central Texas, - Hook948@hotmail.com</p>
 
Can't beat the Titan Road Pro for the money! When set up right you'll be amazed at how good it sounds and gets out

Getting a little harder to find now though......


Doing The Best I Can With What I Have To Work With!

CDX951
</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.