• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Echo board help

  • Thread starter Thread starter saint7ds
  • Start date Start date
S

saint7ds

Guest
Hello all



Someone recently gave me an echo board but no installation instructions. I have no idea who makes it.



There are 2 orange wires that go to a pot. There is 1 red wire, 1 black wire, 1 green wire and one gray wire. The board is relatively small and was wrapped in black tape.



I have searched all over but cannot seem to find any information. Any help would be appreciated.


</p>
 

Hello all



Someone recently gave me an echo board but no installation instructions. I have no idea who makes it.



There are 2 orange wires that go to a pot. There is 1 red wire, 1 black wire, 1 green wire and one gray wire. The board is relatively small and was wrapped in black tape.



I have searched all over but cannot seem to find any information. Any help would be appreciated.


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello