Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Echo board help

  • Thread starter Thread starter saint7ds
  • Start date Start date
S

saint7ds

Guest
Hello all



Someone recently gave me an echo board but no installation instructions. I have no idea who makes it.



There are 2 orange wires that go to a pot. There is 1 red wire, 1 black wire, 1 green wire and one gray wire. The board is relatively small and was wrapped in black tape.



I have searched all over but cannot seem to find any information. Any help would be appreciated.


</p>
 

Hello all



Someone recently gave me an echo board but no installation instructions. I have no idea who makes it.



There are 2 orange wires that go to a pot. There is 1 red wire, 1 black wire, 1 green wire and one gray wire. The board is relatively small and was wrapped in black tape.



I have searched all over but cannot seem to find any information. Any help would be appreciated.


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom