EDUK8TR/WV4L Station pics

[EDUK8TR]

The Shack-
http://www.worldwidedx.com/members/eduk8tr-albums-wv4l-shack-pics.html

The Antennas-:tongue:
http://www.worldwidedx.com/members/eduk8tr-albums-kio-hex-beam-project.html

http://www.worldwidedx.com/members/eduk8tr-albums-delta-loop.html

The tower project-
http://www.worldwidedx.com/members/eduk8tr-albums-wv4l-tower-project.html

 

[Whiplash-265]

NICE work!!

Opinions on the Hex? Did you add the ice kit? Hard to handle? I'll be hauling it up 40' if i get it, wondering how awkward it might be
Are you using anything for below 20Mhz?
Kudos on the panel box...i was thinking along the same lines but mounted on the tower, also to utilize arrestors and with a ground-bus...i have to go up to the second floor

 

[EDUK8TR]

NICE work!!

Opinions on the Hex? Did you add the ice kit? Hard to handle? I'll be hauling it up 40' if i get it, wondering how awkward it might be
Are you using anything for below 20Mhz?
Kudos on the panel box...i was thinking along the same lines but mounted on the tower, also to utilize arrestors and with a ground-bus...i have to go up to the second floor

No Opinion on the Hex to date. This is my first beam so this is new territory for me. The beam is just a little awkward but I was able to place it on the end of the mast on the tower by myself climbing up a 8ft step ladder. So you shouldn't have any trouble managing it. I do have plans to put a loop that I can try and tune for 6M-160M. I too an using arrestors that are at the base of the tower.

73

Wayne C.

 

[Whiplash-265]

Thanx for the reply Wayne. Prob not ordering the hex for a couple of months so please if you find something awry with it let it be known? 73, Marty