EPT360010a

[paulsbox]

I need a alignment manual for the EPT360010a, i can find 14 verision but not the 10a?

Paul

 

[sonoma]

what radio is it in. my service manuals only show the board number after I open the page up. the name will help.

 

[paulsbox]

Galaxy Saturn, it was also in a Galaxy II and president Ronald radio0.

Thanks

 

[Robb]

Check your board against the Galaxy 99v and see if they are the same layout.
http://www.cbtricks.com/radios/galaxy/dx99v/graphics/99v_3600-14c_top.gif
http://www.cbtricks.com/radios/galaxy/dx99v/index.htm

 

[sonoma]

I have the book for the galaxy saturn but never have copied it. at least I do not think I have. will look for it.

 

[paulsbox]

Most of the available manuals are for the 14 board, very similar but not the same.

 

[sonoma]

here is a link to the galaxy saturn radio. see if this helps

http://www.radioaficion.com/HamNews/mods/mods-cb/8264-galaxy-saturn-service-manual.html

 

[paulsbox]

Thanks, ill give it a try. The 10a board was the earliest one used in the Saturn. they had 11,12,13, and the 14 revisions.

 

[sonoma]

I just pulled my service manual for this radio from cbc international. it states that all 4 radios use the same vr and L cans by number so they all use the same sheets. the parts will be in a different location but use the same specs. at least that is what it shows in the book I have.

 

[nomadradio]

The original "Galaxy Saturn" service manual had that board shown in it.

Here's the schematic for the original 5-band Galaxy Echo SSB and early Saturn.

Doesn't show the ID for the circuit board, but I'm pretty sure this is the "10A" board.

This came from a "Saturn Service Manual" published by Thomas Publishing in the early 90s. The rest of what I have is another 12 PDF files, one file for each of 12 more pages.

Not gonna upload them all right now.

73