Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

expo 100 type n kit?

A

akzo1990

Member
Apr 4, 2005
37
0
16
Arkansas
I have one of these kits with the black wire broke off of it. Can anyone tell me where the correct placement of the wire is, or send me a picture of it?

Thanks,
ED
 

I also got one like that wire fell outta the bag with the expo board but seperate
the wire goes on the front of the board on a ground trace located near center if i remember right towards the back there were also wires near the crystal your first thought is it goes in there but it doesnt that black wire was at the front right center side I believe,
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom