• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

FCC Delays SSB and AM Change

ARRL

Well-Known Member
Nov 15, 2008
10,933
54
58
The FCC announced April 1 that the scheduled mandatory changeover of SSB and AM HF voice communications in the Amateur Radio Service has been delayed for one year; originally scheduled to begin April 1, 2009, the new changes will now take effect April 1, 2010. Under the plan, originally approved by Congress during the Clinton Administration, all Amateur Radio voice communication in the HF spectrum (3-30 MHz) will adopt digital voice technologies, reducing the bandwidth of typical QSOs from an average of 2.4 kHz to an average of 1.5 kHz. No particular protocol is specified -- amateurs can use any method they desire as long as it is digital. During the transition period, 20 meter nets have been assigned temporary frequencies in the 10 meter band for their analog (SSB or AM) operations; they have also temporarily been allowed to use up to 10 kW due to limited propagation on that band. Note that 160 meters is not included in this changeover, as it -- being below 3 MHz -- is an MF, rather than an HF band. As previously announced by ARRL, QSLs for 10 meter contacts using the temporarily authorized higher power will not count toward DXCC. For more information, please click here.



More...
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.