• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

FS: Mobile Amp

Recon

Sr. Member
I Support WorldwideDX.com!
Jul 28, 2019
1,300
1,443
173
Carl Built 200HD Mobile Amp. Perfect driver amp for my ten-pill amp. Does not have a pre-amp. I purchased this new directly from Carl Built Amps. I recently switched over to a base driver amp to eliminate using a power supply. $175.00 + shipping.
 

Carl Built 200HD Mobile Amp. Perfect driver amp for my ten-pill amp. Does not have a pre-amp. I purchased this new directly from Carl Built Amps. I recently switched over to a base driver amp to eliminate using a power supply. $175.00 + shipping.

Curious, transistors? Pictures?
 
  • Like
Reactions: NZ8N
Please look on Carl Built Amps site to get all information and photo. Thank you.

From the site the 200HD has options. Preamp, bias, and large case option. It appears to be set up just like the old X-Force 200HD amplifier. Eldorado it should have two HG2879 finals with a Hi Lo power setting. Nice little amp.
 
From the site the 200HD has options. Preamp, bias, and large case option. It appears to be set up just like the old X-Force 200HD amplifier. Eldorado it should have two HG2879 finals with a Hi Lo power setting. Nice little amp.
My 200HD has the Hi / Lo power toggle switch. No Bias, no Preamp and the standard sized case. I have prepared it for shipping and the approximate dimensions of the amp are; 4-1/2" W X 4-1/2" H X 6-1/2" L.
 
  • Like
Reactions: Shadetree Mechanic

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.