i posted this in the swap area,so lets go in the right place ......is there a way to get" if "out of the 8 or 6 pin connectors on the back of the radio,i want to use a sdplay rsp1a with out using a mfj1708b unit.or any ideas to do this another way??
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Winners of the three Retevis radios 16 Anniversary giveaway are announced!! Click Here to find out if you won!
ft 991a if out
- Thread starter jesse everett
- Start date
On QRZ there is a posting about a Brazilian ham who just build in an SDR stick into the FT991A using a handy I.F. out from the transceiver, have to dig for that thread though.
Found another source:
https://www.rtl-sdr.com/cleanly-embedding-an-rtl-sdr-in-an-ft-991a-with-no-extra-cables/
Hope that helps?
Found another source:
https://www.rtl-sdr.com/cleanly-embedding-an-rtl-sdr-in-an-ft-991a-with-no-extra-cables/
Hope that helps?