Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

FTM-350 set mode APRS

D

dli009

Member
Jan 31, 2010
9
0
11
Hi I have a question as yaesu FTM-350 set mode WIDE1-1, WIDE2-2 or WIDE1-1, WIDE3-3 in the menu, I see only WIDE1-1?
The manual is very bad and very little information there
 

On Menu E19-Digi Path Select - You can change it from WIDE1-1 or WIDE1-2,WIDE2-1 or custom paths. If you want to change it to something like WIDE 1-1,WIDE2-2, you're going to have to us a custom path like PATH 1. Then you would go down to the DIGI PATH 1 menu and punch in your custom path.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom