galaxy 44hp conversion

[nitro]

Can someone tell me how or where to find frequency conversion on a galaxy 44hp.thanks in advance

 

[sonoma]

see if this is what you need.

Galaxy DX Radios DX44V Service Manual

here is all the galaxy's on cbtricks

http://www.cbtricks.com/radios/galaxy/index.htm

 

[nitro]

im referring to the 44hp.this is for the 44v.dont know if its same process.looking to buy one and wanting info on it before buying.thanks.

 

[sonoma]

that is the only info I have seen so far.could be a jumper to switch some where.

 

[9C1Driver]

I think that the conversion process will involve soldering & adding/removing parts. Recently the FCC cracked down on Export radio's claiming they were to easy to convert. Bottom line is the simple process of moving a jumper from Con 1 to 3 or something simple are gone. I would just buy the radio from a shop that does quality tech work, this way the radio is converted, tuned, and aligned once and you never have to mess with it.

 

[Zen]

Can someone tell me how or where to find frequency conversion on a galaxy 44hp.thanks in advance

Did you ever find info for the conversion?

 

[sonoma]

it should be the same as the galaxy 55hp. it has the 360015 board in it.

 

[Zen]

it should be the same as the galaxy 55hp. it has the 360015 board in it.

I looked at that one… mine doesn't have the jumper wire or the same solder bridge that the 55 does!

 

[Amtrak]

 

[sonoma]

you have the old version of the resisters you have to take out. can not tell if there is a solder bridge in the area or not. this is the mod you have.

http://www.cbtricks.com/radios/connex/cx_3300_cx_3300hp/3300_freq_mod_new.htm