looking to see if anyone has any info on a dual mosfet mod for the 949 or 966ranger. I am looking for something other than the ekl version no luck with that one.
MIKE
MIKE
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
galaxy 949 or ept069610z dual mosfet mod
- Thread starter speedracer6g
- Start date
looking to see if anyone has any info on a dual mosfet mod for the 949 or 966ranger. I am looking for something other than the ekl version no luck with that one.
MIKE
The only changes are to the driver and final circuits in these radios.
Since the factory has already made available schematics for the mosfet models just do an "AB" comparison.
Look at the driver and final circuit of the bipolar model shown here, http://www.cbtricks.com/radios/galaxy/dx959/graphics/dx959_sch.pdf
Then compare to the driver/final circuit of the mosfet version shown here, http://www.cbtricks.com/radios/galaxy/dx959/graphics/dx959_mosfet_sch.pdf
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.