You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Ok so i finally figured out why my new(for me) Texas star 667 is only putting out 200 watts. Shockwave advised me that due to the fact that the small heatsink used for the 2x2290's heats up really quick they low drive the heck out of them from the radio by only utilizing the driver stage thats in the radio to drive the 2290's. Does anyone know if you can go about adding a set of erf2030's to the place where they would normally be if the radio had them without too much trouble. I really like my 95T and would like to use it with the 667 but i didnt buy the amp to have it loaf along at 200 watts. pointless.....anyway if anyone is good at looking at schematics here ya go
-BigRed222

<blockquote data-quote="bigred222" data-source="post: 437835" data-attributes="member: 1839">Ok so i finally figured out why my new(for me) Texas star 667 is only putting out 200 watts. Shockwave advised me that due to the fact that the small heatsink used for the 2x2290&#039;s heats up really quick they low drive the heck out of them from the radio by only utilizing the driver stage thats in the radio to drive the 2290&#039;s. Does anyone know if you can go about adding a set of erf2030&#039;s to the place where they would normally be if the radio had them without too much trouble. I really like my 95T and would like to use it with the 667 but i didnt buy the amp to have it loaf along at 200 watts. pointless.....anyway if anyone is good at looking at schematics here ya go<img src="http://www.cbtricks.com/radios/galaxy/dx95t/graphics/dx95t_ept690010c_parts_layout_top.gif" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />-BigRed222</blockquote>

[QUOTE="bigred222, post: 437835, member: 1839"] Ok so i finally figured out why my new(for me) Texas star 667 is only putting out 200 watts. Shockwave advised me that due to the fact that the small heatsink used for the 2x2290's heats up really quick they low drive the heck out of them from the radio by only utilizing the driver stage thats in the radio to drive the 2290's. Does anyone know if you can go about adding a set of erf2030's to the place where they would normally be if the radio had them without too much trouble. I really like my 95T and would like to use it with the 667 but i didnt buy the amp to have it loaf along at 200 watts. pointless.....anyway if anyone is good at looking at schematics here ya go [IMG]http://www.cbtricks.com/radios/galaxy/dx95t/graphics/dx95t_ept690010c_parts_layout_top.gif[/IMG] -BigRed222 [/QUOTE]

Top Bottom