Galaxy Maleka

[cbshack]

I am trying to repair one of these radios. I can get good receive and tranmsit on about 50 channels or so. It can be band AB, C, D, or band F. It is a 3600 board. Even on band D which is CB I can cover 40 channels and then about 10 or so into band E. It only seems to recieve and transmit properly on 50 channels no matter how I tune L44, 43, 42, 40 and 33 I believe.

Thanks for the help.

 

[Toll_Free]

I am trying to repair one of these radios. I can get good receive and tranmsit on about 50 channels or so. It can be band AB, C, D, or band F. It is a 3600 board. Even on band D which is CB I can cover 40 channels and then about 10 or so into band E. It only seems to recieve and transmit properly on 50 channels no matter how I tune L44, 43, 42, 40 and 33 I believe.

Thanks for the help.

VCO issue. Not locking across the entire range. Perform a full alignment, according to galaxy service manual / galaxy spec's.

--Toll_Free

 

[DTB Radio]

Ditto. You won't know if its an alignment issue or a part failure (or other circuit failure) until a full factory alignment is done. Many times the fault will make itself known during the alignment process, narrowing your search scope considerably.

 

[Rick]

Re: Re: Galaxy Maleka

Sounds like a binary adder or PLL fault.