-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
GalaxyII and Galaxy 88
- Thread starter tilehead
- Start date
For info on How to use the controls on the Texas Star 667 go here:
www.texasstar.com/CWmed.html
As for the Board number, should be a EPT 3600 something(10-A, 10-z,11-z etc) you should be able to find that number printed on the board on both radios.
Open both radios up and look, it will be real clear if they are the same main board.
73
Jeff
www.texasstar.com/CWmed.html
As for the Board number, should be a EPT 3600 something(10-A, 10-z,11-z etc) you should be able to find that number printed on the board on both radios.
Open both radios up and look, it will be real clear if they are the same main board.
73
Jeff
And keep the power going into that 667 low, you don`t need much to make that amp run full output, it has a built in driver......
73
Jeff
73
Jeff