Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Having problems while mobile

  • Thread starter Thread starter 891 ONTARIO CANADA
  • Start date Start date
8

891 ONTARIO CANADA

Guest
The last time we had the CB in my truck we had some funky things going on with the gauges while transmitting. When I was keying up the RPM gauge starting swinging back and forth as we spoke. This only happening when I had the ignition in Aux. I know I could turn the truck off but then I run into the problem of draining my battery. It was also a very cold night.



We were set up with a TRC485 and a 102" with 3 mag mount. The cable is RG58AU with PL259 connectors and using a standard stud mount. The truck is a 2002 Toyota Rav 4.



I love going mobile but I don't want to blow up my truck. Any suggestions?



wav.gif




posticon62.gif



</p>
 

The last time we had the CB in my truck we had some funky things going on with the gauges while transmitting. When I was keying up the RPM gauge starting swinging back and forth as we spoke. This only happening when I had the ignition in Aux. I know I could turn the truck off but then I run into the problem of draining my battery. It was also a very cold night.



We were set up with a TRC485 and a 102" with 3 mag mount. The cable is RG58AU with PL259 connectors and using a standard stud mount. The truck is a 2002 Toyota Rav 4.



I love going mobile but I don't want to blow up my truck. Any suggestions?



wav.gif




posticon62.gif



</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom