Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Help!! 2950DX has no output

T

tramd

Well-Known Member
Jul 17, 2009
143
193
73
I have a 2950DX that lost it's output on all modes,AM ,FM and SSB. My freq. counter shows it still puts out the correct frequency on AM but there is no power. It still receives perfectly and if I whistle into it on SSB it twitches the needle on my external meter ever so slightly but there is no carrier on AM or FM. When I measure the DC voltage in receive at the mirror jumper 7,8,9, I show 12.5v on SSB and 6v on AM and FM. In transmit SSB drops to .9v and Am and FM drop to .1V. The voltage on the Am regulator seems to be okay in both transmit and receive. Any ideas as to what's causing this? Thanks
 


dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom