• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Help - what is this?


Easy! It is a base plate similar to the "coin" type plate freecell created to mount multiple sticks on. The idea is to increase the surface area of the new "array" over the individual stick. It also appears to have a polarity or orrientation option (ie: north/south-east/west) via the pl259 input(s) like the thunder 8xb from signal eng. It appears to be set up to use with the sticks "hung" facing downward but I'm not sure.
Thats my 2 pennies.......
 
I say RDF. There is only one antenna connector,the SO-239 jack.The other jack appears to be a power connector.The antenna mounts are meant to have the antenna elements extending both above and below the center hub piece.The hub would be in the middle of the elements.Looks like a typical Adcock RDF antenna
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.