• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Help with HF vertical antenna base.

firerunner

Well-Known Member
Oct 24, 2014
162
110
53
San Francisco Bay Area
Just wondering if anyone knows the brand of this antenna base.

CAA445F3-8A97-4672-99B3-3D54E110AC70_zpsot21cwvc.jpg


5492A5C5-996D-440E-9DA1-43F389931C78_zps4kj8vznk.jpg


Any help would appreciated.
 

it looks like a clr 2 or maybe a radio shack model like the clr,,, it has been modified,,, you can tell by the bolts in the base and coax connector,,,, the clr had a coil on the inside that would burn up if more than 300 watts was used,,,,,,, so there were a lot of mods done to make antenna usable again,,,,
 
Thanks Midnight, I thought it might be something like a hustler BTV antenna. I actually know where there a re two of the CLR2 antennas, I'm sure not still in use.The base is really heavy duty 1/8" thick.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.