Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Howdy.

Oldtimer

Oldtimer

Active Member
May 20, 2008
223
9
28
77
Stuart Florida
I took the 2030 final and en1230 out of my Cobra 29 wx/nw/st.
I put back the stock final and replaced the resistor at R-56.
Now I can rx with no problem but when I key the mike nothing.
The meter in the radio doesn't move on rx or tx.
Any ideas?
Thanks
GOD BLESS
 

Does the transmit/recieve led change colors when you key the mike? Is the switch set to SWR or Calibrate? Just swapping the final should not have caused problems. Recheck all the connections and make sure that none are touching where they are not supposed to and vice versa.

BC
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom