Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

HR2600

doctor

doctor

Supporting Member
I Support WorldwideDX.com!
Aug 1, 2006
1,036
80
58
82
indiana
Has anyone experienced when after xmiting on the above radio and release of the mic button the receive on the radio is not full, you can hear the stations but they are low in audio, and pressing the mic button a few times the receive audio returns to normal..Any comments or suggestions

DOCTOR/795 :shock:
 

Ide resolder the wires on the mic plug cold or bad solder joints do this. I know that a bad connection on the SO239 connector on the back of the radio can cause this like bad coax or the PL259 coax connector isnt sitting right in one radio from one rado to the next for some reason. Ivwe seen weird BS like this from time to time unexplainable but thats the wonderful world of radio. My guess is bad solder though. Anyways let us know what you come up with for a cure.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom