• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

I bought an LMX 270 hustler 2 meter and 70 cm antenna

Rwb

tell the devil im gettin there as fast as i can,r
Jun 30, 2018
4,367
6,447
523
71
I got it on an nmo fender mount. Swr was very easy to set .2 meter was flat 1 to 1 top to bottom frequincies. 70 cm went from 1.3 to 1 on 440 to 1.5 to 1 on 446.
Repeater i use is 62 miles from home.i can keep it open n talk driving that far sending 50 watts out.
Hustler always had quality antennas.
I bought mine direct from new tronics hustler at mineral wells,tejas.
If i need another antenna it will be hustler im thinkin.
This antenna is well built like i remember hustler quality
 
  • Like
Reactions: Riverman

https://www.hamradio.com/detail.cfm?pid=H0-006193
H0-006193A.jpg

http://new-tronics.com/main/html/mobile_mx_series_uhf___vhf.html
 
  • Like
Reactions: Rwb
Today i will take a shot,its on a larson fender mount.when decent weather arrives,its moving to top of cab
 
20200208_075337.jpg
20200208_075330.jpg
20200208_075352.jpg
there it is.i like it,not real tall,gaudy looking.like i said when weather gets nice its going up on center of cab, mudfoot
 
It gets out well,swr was easy to set. Carrys the hustler new tronics rugged build quality. The base coil plastic seems very solid
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.