Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

I got my Jo Gunn 6VDX up on my US Tower!

Shockwave said:
Check out the specs on the Jo Gunn site. It says vertical and horizontal on a single feed line. Because the elements are between horizontal and vertical, you get sensitivity to both.
Click to expand...


It may say that, but the simulations say otherwise. I have ran it through a few programs, and there is just a tad vertical. My testing here on it also says otherwise. And the side rejection is more then any other beam I have ever used, and it is very very very tuchy in the direction also. I can just bump my rotor and change db's.

73's
 
I also run 1/2 heliax direct bury from the shack out to the remote antenna switch at the tower base 90'. Good stuff!!!
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom