• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

I have a Problem!!!!!

jdchet

Sr. Member
Jan 19, 2002
499
634
103
67
Rootstown, Ohio
My Titan-KLV203 setup worked great in my 2000 Chevy S-10. moved it to my brandy new 2002 Chevy Silverado and nothing but problems! Hooked up to the aux cig lighter plugs in both vehicles, same antenna (Wilson 1000 MagMount).I now get a 4 or 5 noise level from the fuel pump when engine is running, DK varies from 1.4w to 3w, depending on whether the engine is running or not! HELP!


CDX 951

Kenworth

Galaxy 77HML,
Astatic 636L Mic.,
Wilson Trucker 2000

Chevy Silverado

TitanII Road Pro,KLV-203, Wilson 1000Mag Mount

smalltractorhill



</p>
 

My Titan-KLV203 setup worked great in my 2000 Chevy S-10. moved it to my brandy new 2002 Chevy Silverado and nothing but problems! Hooked up to the aux cig lighter plugs in both vehicles, same antenna (Wilson 1000 MagMount).I now get a 4 or 5 noise level from the fuel pump when engine is running, DK varies from 1.4w to 3w, depending on whether the engine is running or not! HELP!


CDX 951

Kenworth

Galaxy 77HML,
Astatic 636L Mic.,
Wilson Trucker 2000

Chevy Silverado

TitanII Road Pro,KLV-203, Wilson 1000Mag Mount

smalltractorhill



</p>
 
I would start by running power directly off of the battery, both positive and ground. I would also establish a good ground from the radio case to the chasis near the radio. I used 12 ga. wire in my setup fused at the battery.


Wayne C.

787 in VA

CDX-787<BR
SS3900TT

Magna Force 900

D104M6B

MR. COILY Single Coil


educate-01sig.gif
</p>
 
I would start by running power directly off of the battery, both positive and ground. I would also establish a good ground from the radio case to the chasis near the radio. I used 12 ga. wire in my setup fused at the battery.


Wayne C.

787 in VA

CDX-787<BR
SS3900TT

Magna Force 900

D104M6B

MR. COILY Single Coil


educate-01sig.gif
</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated