i really need your help!

[Porkchop]

ok guys,i really need the wiring diagram for a magnum omegaforce to turner +3b mic.
i've searched the net,but cannot seem to find what i'm looking for.
i know there's someone out there that can help
cheers! :?

 

[bcrewcaptain]

here is the mic wiring link

mic wiring

and radio wiring is


Pin #1 ~ Microphone Audio / White
Pin #2 ~ Receive / Black
Pin #3 ~ Transmit / Red
Pin #4 ~ Down(Up w/22K Ohm Resistor) / Blue
Pin #5 ~ Ground / Shield w/yellow sleeve
Pin #6 ~ +13.8VDC / Brown

 

[Porkchop]

cheers for that..nice one

are you sure this is correct though?

Pin #1 ~ Microphone Audio / White
Pin #2 ~ Receive / Black
Pin #3 ~ Transmit / Red
Pin #4 ~ Down(Up w/22K Ohm Resistor) / Blue
Pin #5 ~ Ground / Shield w/yellow sleeve
Pin #6 ~ +13.8VDC / Brown

from what i can gather it should be...

Pin #1 ~ Microphone Audio / White
Pin #2 ~ Receive / Black
Pin #3 ~ Transmit / Blue
Pin #4 ~ N/C
Pin #5 ~ Ground / Shield w/Red
Pin #6 ~ +13.8VDC / No Wire

am i getting this wrong? because when i insert the plug,the radio goes quiet,and the tx sign comes on,but with no modulation!
i'm beginning to think that this combination is not going to work
:?

 

[unit725]

Don't wire anything to pin #6

 

[bcrewcaptain]

sorry, should clarified..the colors I put up were for the stock mic....my bad

 

[Porkchop]

lol......cheers guys.
the omegaforce really doesn't want to know this mic :roll:
oh well,i tried...
thanx!