Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

IC-P7A and Satellites

T

Tyrol

Member
Jul 13, 2010
5
0
11
Was going through a deceased estate and found a ic p7a.
Any good for working satellites? I see it puts out 1.5 watts vhf and 1 watt uhf.
Is that enough power to get them with a homebrew arrow replica.

Regards,

Tyrol.
 

Tyrol said:
Was going through a deceased estate and found a ic p7a.
Any good for working satellites? I see it puts out 1.5 watts vhf and 1 watt uhf.
Is that enough power to get them with a homebrew arrow replica.

Regards,

Tyrol.
Click to expand...
Should work on low power. I have worked the birds on good passes with my yaesu ht on low power i just get stepped on allot more.
 
It will work, it will just be a little more work....and that can make things a little more fun :)
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom