-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
ICOM 5100 cross band mods?
- Thread starter Merlinv2
- Start date
I got it and thanks to all
before and after the modification
The left picture shows the standard configuration for an IC-5100E that is intended for german use.
( 1 ) ( 2 )
( 3* ) ( 4 )
( 5 ) ( 6 )
( 7 ) ( 8 )
( 9 ) ( 10 )
( 11 )
( 12* )
( 13 ) ( 14* )
( 15* ) ( 16* )
* -> installed by default
3 -> TX 70cm ext.
12 -> Crossband
14 -> TX 2m ext.
15 -> the removal converts the transceiver into the japanese version
16 -> the removal converts the transceiver into the american version (IC-5100A)
before and after the modification
The left picture shows the standard configuration for an IC-5100E that is intended for german use.
( 1 ) ( 2 )
( 3* ) ( 4 )
( 5 ) ( 6 )
( 7 ) ( 8 )
( 9 ) ( 10 )
( 11 )
( 12* )
( 13 ) ( 14* )
( 15* ) ( 16* )
* -> installed by default
3 -> TX 70cm ext.
12 -> Crossband
14 -> TX 2m ext.
15 -> the removal converts the transceiver into the japanese version
16 -> the removal converts the transceiver into the american version (IC-5100A)