Icom 746pro sudden death

[boog351]

Pretty common problem, dead ic-151, mine has signal on the input, dead output.
Does anyone know of a reputable source for the UPC1678G ?
My usual sources, rf parts, mouser, digikey didn't have it.
I don't like buying parts from ebay, 2 listings from 1 seller as of now.

 

[W4KVW]

Pretty common problem, dead ic-151, mine has signal on the input, dead output.
Does anyone know of a reputable source for the UPC1678G ?
My usual sources, rf parts, mouser, digikey didn't have it.
I don't like buying parts from ebay, 2 listings from 1 seller as of now.

It's a very common part I believe that ICOM should have them.

 

[boog351]

Thanks, I'll try that route, from what I've seen the original NEC part isn't made anymore, they do make the same part in a smaller package, and I've seen a 3 pin part suggested, but I'd rather go withe the original.

 

[boog351]

It's a no go getting the part from icom, they did give me a few suppliers to check with though.

 

[doffo]

Hoping this isnt common in the 756-Pro II. :| Got that radio on the shelf next to me.