Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

icom IC-208H programming help

Se7en

Se7en

Well-Known Member
Jun 27, 2010
4,573
223
73
Ca
so i got all my ham stuff programmed with the software using the pc all on band A.

yesterday i was messing with it and it can scan bands a-j? i would like to put all my ham stuff on bank A, then 220 stuff on bank B, and police stuff on bank C. so lets say im driving and dont feel like listening to ham stuff so i go to bank B or C and scan either of those is this possible? i am RTFM but cant find much info on it.
 
Last edited:

Improved Dynamic Memory Scan (DMS) system
The improved DMS system allows you to scan all the selected banks you want to scan by simply adding/deleting bank links with Icom’s exclusive Bank Link system. Yet another convenient feature to make the IC-208H more practical radio.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom