Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Installing UTB1 in 2000GTL

KD0TDG

KD0TDG

W9WDX Amateur Radio Club Member
Sep 23, 2012
39
8
38
Working on my 2000 putting in a UTB-1. Little puzzled where to hook up the orange and yellow wires since the external speakers dont run off the main board like a 148 etc.

Everything else was a breeze...just not certain on these last two. :unsure:
 

Lookin' over the Ski-matic and the boards for the Speaker 1-2 switch and board for the external speakers, I'm guessing my connections will likely need to be made to the board for the switch. :confused1: Ugh :headbang
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom