• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Is the grass really so green on the Auto side of ATU's? 500 & KW ATU's

Naysayer

Solder Balls
I Support WorldwideDX.com!
Mar 6, 2020
326
255
73
New York
Assembled: $255. https://newdiytech.com/products/atu-atu-1000w-antenna-tuner

Kit form: $150 https://newdiytech.com/products/atu...-antenna-tuner-7x7-atu-1000w-by-n7ddc-diy-kit
Based on N7DDC Auto ATU board
I've never used an Auto ATU but the price has fallen so it hard to resist..

Edit:
video reports counterfeit boards and delays from originating country Ukraine.

Think I found my next project if I can get original.

2nd Edit: https://pd5dj.nl/?p=3012 More recent thread about construction and operation problems. Seems like there are substantial issues still
 
Last edited:
  • Like
Reactions: FlatlandBusa

Lots of questions... The matching range or the total inductance / capacitance isn't mentioned. 1KW tuners are typically 1KW into a 3:1 load, and far less into a none resonant load. I went back to a manual ATR-30 tuner as it is far more robust than any auto tuner. There needs to be a true 5KW auto tuner so those of us running none resonant antennas can load them with legal limit +++. All that said, this kit is cheap enough that I will likely get it and see what power level the smoke comes out.

Thanks for posting this!
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.