Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Junker 858 Madison

These old CBs needs every electrolytic capacitor replaced. Frankly, I would rather buy a trouble free new President McKinley CB and call it a day.
 
nomadradio said:
Found 3mm plastic screws on fleabay. The thread pitch is 0.1mm.

Good luck with the motor. They have so little torque that it's hard to judge how well you have freed it up with cleaning and/or lubrication. Takes really low-viscosity oil, I was told.

Never had the patience to rehab those clock motors after the first few tries.

73
Click to expand...
I have bought entire replacement motors on ebay. They are the KitKat clock motors
.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom