Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Junker 858 Madison

These old CBs needs every electrolytic capacitor replaced. Frankly, I would rather buy a trouble free new President McKinley CB and call it a day.
 
nomadradio said:
Found 3mm plastic screws on fleabay. The thread pitch is 0.1mm.

Good luck with the motor. They have so little torque that it's hard to judge how well you have freed it up with cleaning and/or lubrication. Takes really low-viscosity oil, I was told.

Never had the patience to rehab those clock motors after the first few tries.

73
Click to expand...
I have bought entire replacement motors on ebay. They are the KitKat clock motors
.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?
  • @ BayouRadioAmplifier:
    hello
  • @ ShadowDelaware:
    Hambones the entire amp section would have to be retuned, and the rf transformers re wrapped.
  • @ BJ radionut:


      Top Bottom