Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

kenwood TH-D72a

J

JVT

Member
Jan 2, 2012
26
0
11
74
can you get a better speaker for this handheld? I am sure it is operating properly but I have to run it at 3/4 volume. Just checking to see if any aftermarket's are available. I really don't want to use one on the speaker jack.
Jim kf7rin
 

I've never seen a speaker replacement. Did you check the speaker balance setting between the two VFO's?
 
How about a speaker mic? I don't have a current Knwd HT but I used to use the Knwd commercial grade speaker mics on mine. The last Knwd HT I had was a TH-D7A and the commercial mics worked great with it.
 
TH-D72a

Thanks, I got the same suggestion to use a speaker mic from kenwood.
The volume levels are fine. I was just thinking a speaker with a stronger magnet may help.
Jim KF7RIN
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom