Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Kenwood TS-140S issues

B

baco

Member
May 24, 2005
26
0
11
South Florida
www.domini-noctem.com
I have a problem with the Kenwood TS-140S :roll:

The RIT botton is not working. When you pop it, it shows 1.2 on the RIT display but it won't change even if you move the RIT pot. Any suggestions? Could it be a bad pot or a lose wire or something more complex?

The ATT is not working either but if anyone can point me to the right direction regarding the RIT I appreciate it.

laters..

Baco
 

OK looks like no one had this problem... during further investigation I noticed the RIT pot does change frequency in 1/4 or the total range of the pot at about 1500 hours position. I suspect this is just a matter of a dirty or bad potenciometer.

_
Baco
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    latest.png
  • @ BJ radionut:
    BLACKOUT HF
  • @ BJ radionut:
    I am beginning the packing process...XENIA bound Going "Lite": this year....2 items for sale...Rig #1 = FT-920/Gud to Ex condition/Hand Mike/pwr cord/manual (NO BOX) ... #2 = My 1 owner FT-950....EX condition...Original Shipping Double Box/Factory Manual/Never used hand mike...Booths 9107-9111...Ya'al come by say hello...
  • @ BJ radionut:
    Incoming Region Produces X3 Solar Flare
    May 15, 2024 @ 14:55 UTC
    Another major solar flare, but this time from an active region just beginning to turn into view off the east limb. It is possible that the group responsible is old AR 3654 from the previous rotation. The latest flare, an X2.99 event just peaked at 14:38 UTC (May 15). Stay tuned
  • @ BJ radionut:

    Global D-Layer Absorption - Space Weather by SolarHam

    www.solarham.com www.solarham.com


      Top Bottom
      Back