• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Lafayette Com-Phone 23A Power Cord

danmcclain

Sr. Member
I Support WorldwideDX.com!
Dec 11, 2020
1,209
742
123
75
Looking for a small 2 pin power cord for my Lafayette Com-Phone 23A cb radio... Thanks, Dan
 

Attachments

  • IMG_1396.JPG
    IMG_1396.JPG
    1.8 MB · Views: 13
  • IMG_1397.JPG
    IMG_1397.JPG
    1.7 MB · Views: 14

Ken's Electronics in Kalamazoo MI has one listed on his web site.

http://www.kenselectronics.com/lists/pwrcord.htm

What you're looking for is CEA-DC-AR3300-30 Clear Channel Ranger 30 Watt ham amateur radio power cord 16ga 5-ft 7-1/2 Amp fuse

You'll want to change the fuse to a 2 Amp size to be safe for this radio.

I don't see any polarity marking on the power socket. You really do need to be sure a new cord doesn't have the DC polarity backwards.

Hook it up with plus and minus reversed and you'll get damage. Only question is how much.

73
 
Ken's Electronics in Kalamazoo MI has one listed on his web site.

http://www.kenselectronics.com/lists/pwrcord.htm

What you're looking for is CEA-DC-AR3300-30 Clear Channel Ranger 30 Watt ham amateur radio power cord 16ga 5-ft 7-1/2 Amp fuse

You'll want to change the fuse to a 2 Amp size to be safe for this radio.

I don't see any polarity marking on the power socket. You really do need to be sure a new cord doesn't have the DC polarity backwards.

Hook it up with plus and minus reversed and you'll get damage. Only question is how much.

73
nomadradio thank you for the info, will check it out.... Dan
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello