Lafayette HB-525F

[jdchet]

Anyone know the mic wiring for this old 23 channel radio?<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/eyes.gif ALT=":rolleyes"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/frown.gif ALT="">

Thanks!<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/grin.gif ALT=" >D">



JD<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat">

</p>

 

[Triple J]

Which microphone are you going to wire it to. I have an old Astatic Microphone Hookup Manual and Turner Wiring Booklet, both from the 70's I can look through. Standard Astatic hookup to the HB-525 is

white - 1

shield - 3

yellow - N.C.

Blue - 2

Red - 4

Black - N.C.

I had a hard time finding the old "Y" microphone connectors for an old 525F that I have sitting around here. I changed the old connector to a 4 pin connector.



Hope this helps.



Triple J


</p>

 

[jdchet]

Anyone know how the pins are numbered on the Y connectors?<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/eyes.gif ALT=":rolleyes">



JD<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat">

</p>

 

[Triple J]

Have side of the connector where you solder the wires facing you. Make sure it looks like a "Y"



top left is pin 2

top right is pin 3

middle is pin 1

bottom is pin 4



Triple J






</p>

 

[jdchet]

Triple J............Your a lifesaver!

Thanks guy!



JD<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat">

</p>