• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

LDG Electronics Z-100A-DXE

Mudfoot

Elmer
Jun 17, 2009
11,296
6,713
698
64
Southeast Ohio
Kinda looks like LDG partnered with DX Engineering to sell this tuner. Looks like the standard Z100, which are good little tuners.

The best part of this deal is it comes with interface cables for lots of rigs. It comes with a total of 6 different cables. Decent price, especially with the included cables.

I ordered one to use with my FT-891. I need something simple to touch up my 40/80 meter dipole.

 

I once had the LDG AT-1000. They do tune well but the only compliant I had was the relays made some of the loudest clicks during tuning. The bigger box of the 1000 watt unit seem to amplify it more.

Of course all auto-tuners are noisy, just some are worse than others.

I still eyeball the big Palstar roller inductor auto -tuner. It's pricey but that's a real auto-tuner that could tune a rain gutter.
 
  • Like
Reactions: 2RT307
I once had the LDG AT-1000. They do tune well but the only compliant I had was the relays made some of the loudest clicks during tuning. The bigger box of the 1000 watt unit seem to amplify it more.

Of course all auto-tuners are noisy, just some are worse than others.

I still eyeball the big Palstar roller inductor auto -tuner. It's pricey but that's a real auto-tuner that could tune a rain gutter.
I have an LDG Z-11 Pro that I've owned for about 10 years, and now pair it with my FT-891.. Yes, a bit noisy, but it does have a bazillion memories and seems to be bullet proof.

I also have a Palstar AT2K, and love it. I have a cheat sheet that I have the positions for different bands/frequencies written down on, and tuning it only takes a few seconds. The auto version would be pretty sweet though!

73,
Brett
 
Been running this little tuner for a few days. I'm surprised to see it struggle to tune my 10-20 meter dipole. It's not gonna tune anything close too an AT100 Pro II or higher.
 
Last edited:
  • Like
Reactions: AudioShockwav

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.