LMR-400 for Ham Radio/cb radio

[Captain Kilowatt]

...............and captain kilowatt knows too ,been in radio big time for years

42 years to be exact. Worked in commercial broadcasting installing and servicing studios and transmitter sites for 22 years. I've seen and used a LOT of cable over the years. LOL

 

[Rwb]

42 years to be exact. Worked in commercial broadcasting installing and servicing studios and transmitter sites for 22 years. I've seen and used a LOT of cable over the years. LOL

yes sir ,thats why i said it. you say it i belive it

 

[L2]

I use genuine Times Microwave LMR-400.

Even the flies love it.

 

[357]

I have had to replace my Times Microwave LMR-400 3 times just this year. I will NEVER buy that crap again. It was the real deal not some knockoff but it will not handle any power. I ran an 8 pill thru it (1500 bird watts) and it melted like grilled cheese. Stick with RG-213/U and you will never have that problem. I learned my lesson.

maybe into 3:1 match. its probably arcing at the pl259. if you didnt trim the braid right or use cheap connectors? I ran well over 1500w into my imax with it for a few years now, never seen that ever. I even have a rg213 11' loop choke up there that I used for almost 20 years now and its fine.

lmr400 is rated 3.3kw continuous for 10m and 16kw peak at 160m
I'm calling bullshit

Voltage Withstand Volts DC 2500
Jacket Spark Volts RMS 8000
Peak Power kW 16