Load capacitance for custom IF crystal?

[T23]

The pace 1000b is in and works. I figured out the strange switch on the side. I bought a Siltronix VFO 90-1 for it instead if the crystal. The midland needs work now that I popped the cover. The chart I looked at stats the 90-1 will work with the pace 1000m which is just the same board as the 1000b, so has the same crystal scheme which I verified using the crystal mixing chart.

K.M

 

[Adamf]

The pace 1000b is in and works. I figured out the strange switch on the side. I bought a Siltronix VFO 90-1 for it instead if the crystal. The midland needs work now that I popped the cover. The chart I looked at stats the 90-1 will work with the pace 1000m which is just the same board as the 1000b, so has the same crystal scheme which I verified using the crystal mixing chart.

K.M

Hi, I have a Pace 1000B 23 channel, you are saying the Siltronix VFO-1 will work in it? Thanks, Adam

 

[snow bird]

Yes it will Their a lot of VFO out their. the difference between them is the cap used in them I have a chart that shows it some wheir around Hear

 

[Adamf]

Yes it will Their a lot of VFO out their. the difference between them is the cap used in them I have a chart that shows it some wheir around Hear

Hi, I now it will work but there are 3 versions of the 90-1 which have 3 different frequencies, I need the one that is 11.990 so not sure if the others will work. Thanks, Adam

 

[snow bird]

 

[Adamf]

I don't know what that means but thanks

 

[snow bird]

I don't know what that means but thanks

I don't know what that means but thanks

Sorry the pic did not come throw. You can go to CB tricks main page and look at the Sitronix No 90 V C O and you will get the Paper i tryd to send You Others work the same way just change the Cap out to the one you need.

 

[Adamf]

Yes, I saw that, thanks for the reply. Adam