• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

LOLOLOLOL


That's an old school TNT 150 from the 1980s. Looks like the 3 position power control was replaced with a switch. Decent amp but worth $100 in mint condition which it isn't.
 
I had a friend, N7LFF that had a little Palomar 90a just like that, it was a good little amp, his had 2 6LF6`s in it.

They made 6LF6`s in two different sizes Short, and Tall....after all of the supply of short one dried up, most people would make a couple of little spacers to let the top cover sit up a little higher to clear the tubes....looks like this guy took a hammer and "stretched" the case.....that looks ugly.
Worth about $100 bucks...if it was clean, and not even that much after someone beat the cover up


73
Jeff
 
That's an old school TNT 150 from the 1980s. Looks like the 3 position power control was replaced with a switch.

I think you nailed the brand that one. Except that I think it is a 3 position switch mounted sideways, LO/MED/HIGH a lot of the old TnT`s were like that. The TnT 250 Plus was set up just like that.
I had a little TnT Super Mod that had two MRF 455`s in it years ago, it was a good little amp on AM.
Used to be able to get them for $99 bucks new, and they were much better than the Texas star Mod V or Mod Plus.

73
Jeff
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.