This radio was intermittent from turning on. When I took the cover off, I noticed a orange broken wire hanging there. It comes off J101 on the bottom right side from the main board just below the meter with the front of the radio facing you. That jack has RED, ORANGE, YELLOW, WHITE wires coming off it. All schematics DO NOT SHOW a 4 pin jack. I need to know where the other end of that orange wire solders to. If someone can help me out, I would really appreciate it. I pulled the on/off switch out but don't see anywhere it could have come from on it.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Magnum S-980
- Thread starter Alabama Trainman
- Start date
The orange wire did go to the switch where the black wire is soldered. I found the same 4 plug harness on a S6 Magnum for the solution.
- No one is chatting at the moment.
-
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-